![]() Note While the reconfiguration is done, you need to change the IP address settings as below. Please feel free to contact our Technical Support if the problem persists. If you still cannot access the configuration page, please restore your Access Point’s factory default settings and reconfigure your Access Point following the instructions of this QIG. Select Wug"vjg"hqnnqykpi"KR" cfftguu" Enter the 192.168.0.100 into the KR"cfftguu field, 255.255.255.0 into the Uwdpgv"ocum fieldĬlick QM" Now, try to log on to the Web-based configuration page again after the above settings have been configured. Click"Xkgy"pgvyqtm" uvcvwu"cpf"vcumu"ĭouble-click Kpvgtpgv" Rtqvqeqn" Xgtukqp" 6" *VER1KR圆+ If the distance between the outlet and the Access Point is too long to supply the power, you can refer to the Power over Ethernet (PoE) solution in Crrgpfkz"C Ugvvkpiu > Eqpvtqn" Rcpgn, and then you will see the following page. Then press the QP1QHH button to power on the device. Plug the provided power adapter into the power jack on the back of the Access Point, and the other end to a standard electrical wall socket. ![]() ![]() The XXXXXX is the last 6 characters of the Access Point’s MAC address. The default SSID of the Access Point is TP-LINK_ XXXXXX. Connect to the Access Point with the Ethernet cable or via wireless. ![]()
0 Comments
Leave a Reply. |
Details
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |